Front View
- A: Operation Panel
-
Use to change the settings of the printer or to operate it.
- B: Platen
- Load an original here.
- C: Document Cover
- Open to load an original on the platen.
- D: Cassette
-
Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.
- E: Paper Guides
- Align with right/left/front sides of the paper stack.
- F: Multi-purpose Tray
- Use when printing on printable discs.
- G: Paper Output Tray
- Printed paper is ejected. Pull out it before printing.
- H: Paper Output Support
- Extend to support ejected paper.
- I: Card Slot
-
Insert a memory card.
- J: Access lamp
-
Lights or flashes to indicate the memory card status.
- K: Multi-purpose Tray Guide
- Place the multi-purpose tray here.
- L: ADF (Auto Document Feeder)
-
Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.
- M: Document Feeder Cover
- Open when clearing jammed documents.
- N: Rear Tray
-
Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
- O: Paper Support
- Extend to load paper in the rear tray.
- P: Rear Tray Cover
- Open to load paper in the rear tray.
- Q: Feed Slot Cover
-
Prevents anything from falling into the feed slot.
Open it to slide the paper guides, and close it before printing.
- R: Paper Guides
- Align with both sides of the paper stack.
- S: Document Output Slot
- Documents scanned from the ADF are delivered here.
- T: Document Tray
- Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
- U: Document Guide
- Adjust this guide to match the width of document in the ADF.